SNMP Command Reference
194 7705 SAR OS System Management Guide
information
Syntax information
Context show>system
Description This command lists the SNMP configuration and statistics.
Output The following output is an example of system information, and Table 20 describes the fields.
Sample Output
A:ALU-1# show system information
===============================================================================
System Information
===============================================================================
System Name : ALU-1
System Type : 7705 SAR-8
System Version : B-0.0.I1204
System Contact :
System Location :
System Coordinates :
System Active Slot : A
System Up Time : 1 days, 02:12:57.84 (hr:min:sec)
SNMP Port : 161
SNMP Engine ID : 0000197f01119ff000000
SNMP Max Message Size : 1500
SNMP Admin State : Enabled
SNMP Oper State : Enabled
SNMP Index Boot Status : Not Persistent
SNMP Sync State : OK
Tel/Tel6/SSH/FTP Admin : Enabled/Disabled/Enabled/Disabled
Tel/Tel6/SSH/FTP Oper : Up/Down/Up/Down
BOF Source : cf3:
Image Source : primary
Config Source : primary
Last Booted Config File: ftp://172.xx.xxx.xxx/./deby-sim1/debby-sim1-config.cfg
Last Boot Cfg Version : THU MAR 11 16:58:20 2009 UTC
out get responses The number of SNMP get response PDUs generated by SNMP
out traps The number of SNMP Trap PDUs generated by SNMP
variables requested The number of MIB objects requested by SNMP
variables set The number of MIB objects set by SNMP as the result of receiving valid
SNMP set request PDUs
Table 19: Show SNMP Counters Output Fields (Continued)
Label Description
To Next Page
Loading...
