SNMP Command Reference
196 7705 SAR OS System Management Guide
SNMP Port The port that SNMP sends responses to management requests
SNMP Engine ID The ID for either the local or remote SNMP engine to uniquely
identify the SNMPv3 node
SNMP Max Message Size The maximum size SNMP packet generated by this node
SNMP Admin State Enabled: SNMP is administratively enabled
Disabled: SNMP is administratively disabled
SNMP Oper State Enabled: SNMP is operationally enabled
Disabled: SNMP is operationally disabled
SNMP Index Boot Status Persistent: Persistent indexes was enabled at the last system
reboot
Disabled: Persistent indexes was disabled at the last system
reboot
SNMP Sync State The state when the synchronization of configuration files
between the primary and secondary CSMs finish
Tel/Tel6/SSH/FTP Admin The administrative state of the Telnet, Telnet IPv6, SSH, and
FTP sessions
Tel/Tel6/SSH/FTP Oper The operational state of the Telnet, Telnet IPv6, SSH, and FTP
sessions
BOF Source The boot location of the BOF
Image Source primary: specifies whether the image was loaded from the
primary location specified in the BOF
secondary: specifies whether the image was loaded from the
secondary location specified in the BOF
tertiary: specifies whether the image was loaded from the
tertiary location specified in the BOF
Config Source primary: specifies whether the configuration was loaded from
the primary location specified in the BOF
secondary: specifies whether the configuration was loaded from
the secondary location specified in the BOF
tertiary: specifies whether the configuration was loaded from the
tertiary location specified in the BOF
Last Booted Config File The URL and filename of the configuration file used for the
most recent boot
Table 20: Show System Information Output Fields (Continued)
Label Description
To Next Page
Loading...
