SNMP Command Reference
198 7705 SAR OS System Management Guide
access-group
Syntax access-group [group-name]
Context show>system>security
Description This command displays access group information.
Parameters group-name — the access group name
Output The following output is an example of access group information, and Table 21 describes the fields.
Primary DNS Server The IP address of the primary DNS server
Secondary DNS Server The IP address of the secondary DNS server
Tertiary DNS Server The IP address of the tertiary DNS server
DNS Domain The DNS domain name of the node
DNS Resolve Preference n/a
BOF Static Routes To: the static route destination
Next Hop: the next hop IP address used to reach the destination
Metric: displays the priority of this static route versus other
static routes
None: no static routes are configured
ATM location ID For ATM OAM loopbacks — the address of the network device
referenced in the loopback request
ICMP Vendor Enhancement: Enabled — inserts one-way timestamp in outbound SAA ICMP
ping packets
Disabled — one-way timestamping is not performed on
outbound SAA ICMP ping packets
Table 20: Show System Information Output Fields (Continued)
Label Description
To Next Page
Loading...
