Alcatel-Lucent 7705 SAR - Page 234

Common Configuration Tasks
234 7705 SAR OS System Management Guide
Use the following CLI syntax to configure an accounting policy:
CLI Syntax: config>log>
accounting-policy acct-policy-id interval
minutes
description description-string
default
record record-name
to file log-file-id
no shutdown
The following displays an example of the accounting policy configuration command syntax:
Example: config>log# accounting-policy 4
config>log>acct-policy# description "This is the default
accounting policy."
config>log>acct-policy# record service-ingress-packets
config>log>acct-policy# default
config>log>acct-policy# to file 1
config>log>acct-policy# exit
config>log# accounting-policy 5
config>log>acct-policy# description "This is a test
accounting policy."
config>log>acct-policy# record service-ingress-packets
config>log>acct-policy# to file 2
config>log>acct-policy#
The following displays the accounting policy configuration:
ALU-12>config>log# info
----------------------------------------------
accounting-policy 4
description "This is the default accounting policy."
record service-ingress-packets
default
to file 1
exit
accounting-policy 5
description "This is a test accounting policy."
record service-ingress-packets
to file 2
exit
----------------------------------------------
ALU-12>config>log#