Log Command Reference
272 7705 SAR OS System Management Guide
Parameters drop — specifies that packets matching the entry criteria will be dropped
forward — specifies that packets matching the entry criteria will be forwarded
match
Syntax [no] match
Context config>log>filter>entry
Description This command creates the context to enter or edit match criteria for a filter entry. When the match
criteria is satisfied, the action associated with the entry is executed.
If more than one match parameter (within one match statement) is specified, then all the criteria must
be satisfied and functional before the action associated with the match is executed.
Use the applications command to display a list of the valid applications.
Match context can consist of multiple match parameters (application, event-number, severity, subject),
but multiple match statements cannot be entered per entry.
The no form of the command removes the match criteria for the entry-id.
Default No match context is defined.
application
Syntax application {eq | neq} application-id
no application
Context config>log>filter>entry>match
Description This command adds a TiMOS application as an event filter match criterion.
A TiMOS application is the software entity that reports the event. Examples of applications include:
IP, MPLS, CLI, and SERVICES. Only one application can be specified per entry.
When multiple application commands are entered, the last command will overwrite the previous
command.
The no form of the command removes the application as a match criterion.
Default no application
To Next Page
Loading...
