Event and Accounting Logs
7705 SAR OS System Management Guide 279
level
Syntax level syslog-level
no level
Context config>log>syslog
Description This command configures the syslog message severity level threshold. All messages with a severity
level equal to or higher than the threshold are sent to the syslog target host.
Only a single threshold level can be specified. If multiple level commands are entered, the last
command will overwrite the previous command.
5 syslogd
6printer
7 net-news
8 uucp
9cron
10 auth-priv
11 ftp
12 ntp
13 log-audit
14 log-alert
15 cron2
16 local0
17 local1
18 local2
19 local3
20 local4
21 local5
22 local6
23 local7
Table 38: Valid Facility Codes (Continued)
Numerical Code Facility Code
To Next Page
Loading...
