Event and Accounting Logs
7705 SAR OS System Management Guide 281
Parameters log-prefix-string — an alphanumeric string of up to 32 characters. Special characters (#, $,
spaces, etc.) cannot be used in the string.
port
Syntax port value
no port
Context config>log>syslog
Description This command configures the UDP port that will be used to send syslog messages to the syslog target
host.
The port configuration is needed if the syslog target host uses a port other than the standard UDP syslog
port 514.
Only one port can be configured. If multiple port commands are entered, the last entered port
overwrites the previously entered ports.
The no form of the command reverts to default value.
Default no port
Parameters value — the configured UDP port number used when sending syslog messages
Values 1 to 65535
To Next Page
Loading...
