Security
7705 SAR OS System Management Guide 29
All commands at and below the hierarchy level of the matched command are subject
to the timetra-action VSA.
Multiple match-strings can be entered in a single timetra-cmd VSA. Match
strings must be semicolon (;) separated (maximum string length is 254 characters).
One or more timetra-cmd VSAs can be entered followed by a single
timetra-action VSA:
• timetra-action <deny | permit> — causes the permit or deny action to
be applied to all match strings specified since the last timetra-action VSA
• timetra-home-directory <home-directory string> — specifies the
home directory that applies for the FTP and CLI user. If this VSA is not configured,
the home directory is Compact Flash slot 1 (cf3: on all platforms).
• timetra-restrict-to-home-directory <true | false> —
specifies if user access is limited to their home directory (and directories and files
subordinate to their home directory). If this VSA is not configured, the user is
allowed to access the entire file system.
• timetra-login-exec <login-exec-string> — specifies the login exec
file that is executed when the user login is successful. If this VSA is not configured,
no login exec file is applied.
If no VSAs are configured for a user, then the following applies.
• The password authentication-order command on the 7705 SAR router must include
local.
• The user name must be configured on the 7705 SAR router.
• The user must be successfully authenticated by the RADIUS server.
• A valid profile must exist on the 7705 SAR router for this user.
If all conditions listed above are not met, then access to the 7705 SAR router is denied and a
failed login event/trap is written to the security log.
For receiving data from the RADIUS server, the following are supported:
• Juniper (vendor-id 4874) attributes 4 (Primary DNS server) and 5 (Secondary DNS
server)
• Redback (vendor-id 2352) attributes 1 (Primary DNS) and 2 (Secondary DNS)
• sending authentication requests: (from the DSL Forum) (vendor-id 3561), attributes
1 (Circuit ID) and 2 (Remote ID)
To Next Page
Loading...
