EasyManua.ls Logo

Alcatel-Lucent 7705 SAR - Page 307

Alcatel-Lucent 7705 SAR
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Event and Accounting Logs
7705 SAR OS System Management Guide 307
Sample Memory or File Event Log Contents Output
A:gal171# show log log-id 99
===============================================================================
Event Log 99
===============================================================================
Description : Default System Log
Memory Log contents [size=500 next event=3722 (wrapped)]
3721 2008/02/07 09:14:06.69 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3720 2008/02/07 09:13:18.86 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3719 2008/02/01 11:54:15.67 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:52:d4:a5:00"
3718 2008/02/01 11:54:15.40 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:5e:00:a5:00"
...
===============================================================================
A:gal171
snmp-trap-group
Syntax snmp-trap-group [log-id]
Context show>log
Description This command displays SNMP trap group configuration information.
Parameters log-id — displays only SNMP trap group information for the specified trap group log ID
Values 1 to 99
Output The following output is an example of SNMP trap group information, and Table 48 describes the
fields.
Sample Output
*A:ALU-48>config>log# show log snmp-trap-group
===============================================================================
SNMP Trap Groups
===============================================================================
id name
port address
-------------------------------------------------------------------------------
29 name
162 10.20.30.10
===============================================================================
*A:ALU-48>config>log#

Table of Contents

Related product manuals