Alcatel-Lucent 7705 SAR - Page 57

Security
7705 SAR OS System Management Guide 57
On the local router, use the following CLI commands to configure RADIUS authentication:
CLI Syntax: config>system>security
radius
port port
retry count
server server-index address ip-address secret
key [hash1 | hash2]
timeout seconds
no shutdown
The following example displays the CLI syntax usage:
Example: config>system>security>
security# radius
security# no shutdown
security>radius# server 1 address A:A:A:A:A:A:A:1 secret
test11
security>radius# server 2 address 10.10.0.1 secret test2
security>radius# server 3 address 10.10.0.2 secret test3
security>radius# server 4 address 10.10.0.3 secret test4
security>radius# retry 5
security>radius# timeout 5
config>system>security>radius# exit
The following example displays the RADIUS authentication configuration:
ALU-1>config>system>security# info
----------------------------------------------
retry 5
timeout 5
server 1 address A:A:A:A:A:A:A:1 secret "test1"
server 2 address 10.10.0.1 secret "test2"
server 3 address 10.10.0.2 secret "test3"
server 4 address 10.10.0.3 secret "test4"
...
----------------------------------------
ALU-1>config>system>security#