Alcatel-Lucent 7750 SR OS - Page 245

Command Reference
7750 SR OS Interface Configuration Guide Page 245
— [no] report-alarm [ais] [los] [oof] [rai] [looped]
— [no] shutdown
— signal-mode {cas}
— no signal-mode
— threshold {ber-sd | ber-sf} rate {1 | 5 | 10 | 50 | 100}
—no threshold {ber-sd | ber-sf}
—E3 Commands
— [no] e3 [sonet-sdh-index]
— atm
— cell-format cell-format
— min-vp-vpi value
— bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alter-
nating} duration duration
—no bert
— bit-error-insertion rate
—no bit-error-insertion
— cisco-hdlc
— down-count down-count
—no down-count
— keepalive time-interval
—no keepalive
— up-count up-count
—no up-count
— clock-source {loop-timed | node-timed}
— crc {16 | 32}
— description description-string
—no description
— [no] egress-scheduler-override
— level
priority-level rate pir-rate [cir cir-rate]
—no level priority-level
— max-rate rate
—no max-rate
— egress-scheduler-policy port-scheduler-policy-name
— encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-
relay | wan-mirror | cisco-hdlc | cem}
— [no] feac-loop-respond
— frame-relay
— [no] frf-12
— egress
— qos-profile profile-id
—no qos-profile
— fragment-threshold threshold
—no fragment-threshold
— lmi-type {ansi | itu | none | rev1}
— mode {dce | dte | bidir}
— n391dte intervals
—no n391dte
— n392dce threshold
—no n392dce
— n392dte threshold
—no n392dte
— n393dce count
—no n393dce
— n393dte count
—no n393dte
— t391dte keepalive