Enhanced Subscriber Management (ESM) Accounting
Page 170 7750 SR RADIUS Attributes Reference Guide
22 Framed-Route string max. 16
Framed-
Routes
<ip-prefix>/<prefix-length> <space> 0.0.0.0
<space> <metric> [<space> tag <space> <tag-
value>] <space> pref <space> <preference-
value>”
The gateway address is always reported as
"0.0.0.0", representing the host ip.
For example:
Framed-Route = "192.168.1.0/24 0.0.0.0 0
pref 0" corresponds with a managed route with
default metrics (metric=0, no tag,
preference=0)
Framed-Route = "192.168.1.0/24 0.0.0.0 10
tag 3 pref 100" corresponds with a managed
route with metric=10, tag=3 and
preference=100
25 Class octets 253 chars For example: Class = My Class
30 Called-Station-Id string 64 chars LNS: L2TP Called Number AVP21 from
LAC
For example: Called-Station-Id = 4441212
WLAN-GW: AP-MAC and SSID, separated
by a colon
For example: Called-Station-Id =
00:00:01:00:00:01:my_ssid
31 Calling-Station-Id string 64 chars # llid|mac|remote-id|sap-id|sap-string (64 char.
string configured at sap-level)
For example: include-radius-attribute calling-
station-id sap-id Calling-Station-Id = 1/1/2:1.1
32 NAS-Identifier string 32 chars For example: NAS-Identifier = PE1-Antwerp
40 Acct-Status-Type integer 4 1=Start, 2=Stop, 3=Interim Update,
7=Accounting-On, 8=Accounting-Off,
9=Tunnel-Start, 10=Tunnel-Stop, 11=Tunnel-
Reject, 12=Tunnel-Link-Start, 13=Tunnel-
Link-Stop, 14=Tunnel-Link-Reject, 15=Failed
41 Acct-Delay-Time integer 4294967295
seconds
For example: # initial accounting start Acct-
Delay-Time = 0 # no ack and retry after 5
seconds Acct-Delay-Time = 5
42 Acct-Input-Octets integer 32 bit counter For example: Acct-Input-Octets = 5000
43 Acct-Output-Octets integer 32 bit counter For example: Acct-Output-Octets = 2000
Table 53: Enhanced Subscriber Management Accounting (limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format
To Next Page
Loading...
