Alcatel-Lucent 7750 - Page 182

Enhanced Subscriber Management (ESM) Accounting
Page 182 7750 SR RADIUS Attributes Reference Guide
26-6527-119 Alc-Acct-O-All-
Packets_64
octets 10 bytes <0x80><policer-id><8 byte value> where
policer-id <1..8>
For example: # egress policer 1
OUTPUT_ALL_PACKETS_64 [119] 10
0x80010000000000000000
26-6527-121 Alc-Nat-Port-Range string no limits <public-ip><space><port- range>[,<port-
range]*<space><outside-routing-instance>
If not all port-ranges fit in a single attribute,
multiple attributes will be generated, each
having this format but with a different set of
port-ranges.
For example:
# public pool address 180.0.1.248; port-range
[37674..37723] in Base Alc-Nat-Port-Range =
180.0.1.248 37674-37723 router base
# public pool address 180.0.1.248; port-range
[37674..37723] and [38507.. 38556] in Base
Alc-Nat-Port-Range = 180.0.1.248 37674-
37723,35807-38556 router base
26-6527-127 Alc-Acct-O-statmode string 253 chars <Q/P-selection 1 Byte><Queue-id|Policer-id 1
Byte><space><statmode-string>
Q/P-selection: 0x00 = Queue statmode, 0x80
= Policer statmode
Queue-id|Policer-id range <1..32>
stat-mode: configured stat-mode
For example:
# configure egress policer 5 stat-mode
offered-limited-capped-cir
OUTPUT_STATMODE [127] 33 0x8001
offered-limited-capped-cir
26-6527-140 Alc-Nat-Outside-Serv-
Id
integer 2147483647 id DSM Only.
For example: Alc-Nat-Outside-Serv-Id = 300
26-6527-141 Alc-Nat-Outside-Ip-
Addr
ipaddr 4 Bytes DSM Only.
For example: Alc-Nat-Outside-Ip-Addr =
21.0.0.113
26-6527-148 Alc-RSSI integer 32 bit value For example: Alc-RSSI = 30
26-6527-163 Alc-Acct-Triggered-
Reason
integer 4 bytes See Table 75 for a description of Accounting
Triggered Reason values.
For Example: ACCT TRIGGERED
INTERIM REASON [163] 4 regular(1)
Table 53: Enhanced Subscriber Management Accounting (limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format