RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 197
43 Acct-Output-Octets Indicates how many L3 octets have been received from this nat user over the
course of this service being provided and send together with [42] Acct-Input-
Octets, [52] Acct-Input-Gigawords and [53] Acct-Output-Gigawords when
octet-counters is included under configure aaa isa-radius-policy <name>.
44 Acct-Session-Id This unique 16 bytes attribute has two different behaviors. If multi-session-id
is not included under configure aaa isa-radius-policy <name> then multiple
port-ranges for the same user are all reported with a common 16 bytes [44]
Acct-Session-id for the different port-ranges and reported via start, interim
and stop accounting messages and without attribute [50] Acct-Multi-Session-
Id. If multi-session-id is configured under configure aaa isa-radius-policy
<name> then multiple port-ranges for the same user are reported with
different 16 bytes [44] Acct-Session-id via start and stop accounting messages
with an additional common 16 bytes attribute [50] Acct-Multi-Session-Id. For
an accounting-on and accounting-off the first 8 bytes from the 16 bytes are put
to zero.
46 Acct-Session-Time Reports the elapsed time in seconds the user has allocated an unique port-
range in accounting start, interim or stop. For accounting-off it reports the
elapsed time in second since the last accounting-on.
47 Acct-Input-Packets Indicates how many packets have been send for this nat user over the course
of this service being provided and send together with [48] Acct-Output-
Packets when frame-counters is included under configure aaa isa-radius-
policy <name>.
48 Acct-Output-Packets Indicates how many packets have been received for this nat user over the
course of this service being provided and send together with [47] Acct-Input-
Packets when frame-counters is included under configure aaa isa-radius-
policy <name>.
49 Acct-Terminate-Cause Indicates why a specific NAT port-range is released in Acct-Stop messages.
Cause host-Request is used If the last port-range for this NAT user is freed
and cause port-unneeded is used when we release a port-range which is not the
last one (multiple port-ranges) for this NAT user. Cause [10]Nas-request is
reported in Accounting-Off and cause [11]Nas-reboot is reported in
Accounting-on. This attribute is only send when release-reason is included
under configure aaa isa-radius-policy <name>.
Table 59: LSN Accounting (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
