Assembling OS6250 Switches Mounting OS6250 Switches
page 4-8 OmniSwitch 6250 Hardware Users Guide September 2015
3 Attach the power supply tray extension bracket to the rear of the power supply tray using one screw
(M3 pan head) and then attach the slide bracket to the extension with two screws (M3 flathead).
Power Supply Tray Extension Bracket
4 Slide the power supply tray and chassis together.
Power Supply Tray Extension Bracket with Slide Bracket
Attach power supply tray extension bracket to
the rear of the chassis.
Slide the power supply tray extension into
slot-bracket on chassis.
To Next Page
Loading...
