OmniSwitch Backup Power Shelf/System (BPS) Monitoring OmniSwitch BPS Components
OmniSwitch Backup Power Shelf/System (BPS) January 2013 page 4-25
Monitoring OmniSwitch BPS Components
The following commands have been added or modified for OmniSwitch BPS support on OS6850E
switches.
Viewing General Power Supply Information
To display all system power supplies, including those installed in the OmniSwitch BPS chassis, enter the
following command:
-> show power supply
To display only power supplies currently installed in the OmniSwitch BPS chassis, enter the following
command:
-> show power supply bps
To display the connector priority for power supplies currently installed in the OmniSwitch BPS chassis,
enter the following command:
-> show power bps connector-priority
Note. For more detailed information on these commands, as well as OmniSwitch BPS configuration
commands, refer to the OmniSwitch CLI Reference Guide.
To Next Page
Loading...
