Slot Numbering Managing OmniSwitch 6850E Series Stacks
page 6-20 OmniSwitch 6850E Series Hardware Users Guide January 2013
Slot Numbering
For a stack of switches to operate as a virtual chassis, each module in the stack must be assigned a unique
slot number. To view the current slot assignments for a stack, use the show ni or show module
commands. The slot number is also displayed on the front panel of each switch by the LED located on the
left side of the chassis (refer to “Status LEDs” on page 2-53 for more information).
There are two ways stacking modules are assigned slot numbers:
• Dynamic slot number assignment by the system software
• Manual slot number assignment by the user
To Next Page
Loading...
