Viewing PoE Power Supply Status Managing Power over Ethernet (PoE)
page 5-4 OmniSwitch 6850E Series Hardware Users Guide January 2013
Viewing PoE Power Supply Status
To view the current status of power supplies installed in the backup power supply, use the show power
command, as shown below:
-> show power
Slot PS Wattage Type Status Location
----+----+---------+------+-----------+----------
1 1 -- -- -- --
1 2 360 AC UP External
1 3 -- -- -- --
2 1 510 AC UP External
2 2 -- -- -- --
2 3 -- -- -- --
3 1 360 AC UP External
3 2 -- -- -- --
3 3 -- -- -- --
The backup power supply will always display as “PS-2”. For detailed information on the show power
command output, refer to the CLI Command Reference Guide.
To Next Page
Loading...
