EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6850E Series - OmniSwitch 6850 E LED Status Indicators

Alcatel-Lucent OmniSwitch 6850E Series
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OmniSwitch 6850E Series Chassis and Hardware Components OmniSwitch 6850E LED Status Indicators
OmniSwitch 6850E Series Hardware Users Guide January 2013 page 2-31
OmniSwitch 6850E LED Status Indicators
LED State Description
OK Solid Green
Solid Amber
Blinking Green
Blinking Amber
System software is operational.
Hardware or System failure.
Normal Diagnostics.
Switch operational but auto-
configuration not successful.
PRI Solid Green
Solid Amber
Off
Primary unit in a stack or standalone
switch.
Secondary unit in a stack.
Switch is idle. (not primary or
secondary)
PWR Solid Green
Solid Amber
Off
Primary power supply operational.
Primary power supply failure.
Primary power supply not present.
BPS Solid Green
Solid Amber
Off
Redundant power supply operational.
Redundant power supply failure.
Redundant power supply not present.
10/100/1000 Solid Green
Blinking Green
Solid Amber
Blinking Amber
Off
Valid Link.
Transmitting or receiving packets in
a link up state for non-PoE .
Valid PoE Link.
Transmitting or receiving packets in
a link up state for PoE .
No link.
SFP/SFP+ Solid Green
Blinking Green
Off
Valid Link.
Transmitting or receiving packets .
No link.
Rear Solid Green
Blinking Green
Off
Valid Link.
Transmitting or receiving packets .
No link.

Table of Contents

Related product manuals