alcora Zero 88 - Introduction

Alcora 73-700-00 Issue 2 Page 9
Introduction
When the desk is in PRESET Mode all the
memory functions are disabled, offering
the user a completely manual system.
The desk can be operated using either
two 12 (24) channel presets controlling 12
(24) channels, or a single WIDE preset
controlling 24 (48) channels.
In Two Preset operation, separate scenes
are set up on PRESET A and PRESET B
using the individual channel faders. The A
MASTER and B MASTER faders are used
to crossfade between the two scenes.
With WIDE selected it is still possible to
crossfade between two scenes. The first
scene is set up on the PRESET A and
PRESET B faders and is stored in the
desk temporarily using the PRESET
CONTROL button.
Once stored, another scene can be set up
on the PRESET A and PRESET B faders.
The A MASTER and B MASTER faders
are used to crossfade between the stored
scene and the scene on the PRESET
faders.
Crossfades between scenes can be
manual or timed.
Overall output is under the control of the
GRAND MASTER.