NOTES
Unprogrammed Copy
If the user selects an unprogrammed scene
memory or sequence step, and presses the
COPY button, any previously copied memory
data will be lost. The light in the PASTE button
will be off, indicating that there is no memory
data available to paste.
Overwriting Copy Data
When the COPY button is pressed , if there is
already memory data stored internally, the
light in the PASTE button will flash briefly and
then stay on.
Paste Light Off
If the light in the PASTE button is off, pressing
the PASTE button will have no effect.
Pasting to Unprogrammed Memory/Step
If memory data is pasted into an
unprogrammed SCENE memory or SEQUENCE
step, the memory or sequence step is now
regarded as programmed and the decimal
point after the memory number or step
number will be removed.
Pasting to Programmed Memory/Step
If memory data is pasted into a programmed
SCENE memory or SEQUENCE step, the
original contents of the memory or step are
overwritten. No warning is given.
Page 26 Alcora 73-700-00 Issue 2
Program Mode
To Next Page
Loading...