45
To remove crosstalk:
1. From the Kit Browser, go to Trigger Edit Mode.
2. Select Learn XTalk and follow the on-screen instructions.
3. Hit all of the Trigger Zones on the selected Trigger Input a
few times. For best results, avoid hitting other triggers. The
Trigger Zone info will be shown as well as the Trigger Meter
and Peak Marker for the Trigger Slot.
4. Little red dashes will appear indicate the crosstalk values
that were learned and will be filtered once you complete the
calibration.
5. Once changes have been made, tap Save. Repeat this
process for any other drums or cymbals you are
experiencing crosstalk with.
Trigger Zone
Trigger Meter
Peak Meter
To Next Page
Loading...
