44
(3.6.2.1) Learn XTalk
The Crosstalk Elimination page is accessed by tapping Learn XTalk in Trigger Edit
mode. This allows you to quickly filter out vibrations across the drum kit which can
cause unwanted triggering. Only one Trigger Slot can be programmed at a time.
1. XTalk Filter
Turn this on or off to enable or disable crosstalk filtering.
2. XTalk Boost
This setting adjusts the offset between when the crosstalk signal is received and
when the crosstalk filtering occurs.
3. Save
Stores all current crosstalk values and exits to Trigger Edit main mode.
4. Cancel
Reverts back to the crosstalk values learned before most recently entering the
mode, and returns to Trigger Edit main mode.
5. Clear
Erases any learned crosstalk values.
1 2
3 4
5
To Next Page
Loading...
