2.2.1 Programming and Configuration
The 8301 is configurable using the web interface or provisioning features.
After booting up, the blue lights on the front will turn off and the adapter will have obtained an IP address. If there is
no DHCP server, the 8301 will default to the static IP address 192.168.1.111.
Press the reset switch (RST) to hear the IP address over the analog outputs (e.g., headset can be connected to the
green output port). The IP address may also be discovered by downloading the Algo locator tool to find Algo devices
on your network: www.algosolutions.com/locator.
Enter the IP address (e.g., 192.168.1.111) into a browser such as Chrome, Firefox, or Edge. The web interface should
be visible, and the default password will be algo in lower case letters.
To Next Page
Loading...
