Algo 8301 - 6.2 Basic Settings

8301 IP Paging Adapter & Scheduler
AL061-UG-GP308301-230725
support@algosolutions.com
Page 19
Note
Web Interface is accessed by entering the 8301 IP Address into a web browser.
Important
It is highly recommended to change the default password if the device is directly connected to a public network.
Status
By default, the Status page of the 8301 will be available before and after logging on. This section can be used to check
the status of the 8301 for the following:
• Device Name
• SIP Registration
• Call Status
• Proxy Status
• Provisioning Status
• MAC
• IPv4
• Date/Time
• Next Scheduled Event
• Multicast Mode
• Volume
• Relay Input Status
• InformaCast License
• ADMP Cloud Monitoring
Note
For security purposes, the Status page can be hidden when logged out through the settings under the Advanced
Settings → Admin tab.
These options may change depending on how the device is configured.
6.2 Basic Settings
6.2.1 SIP
The SIP tab under Basic Settings allows for the SIP server information and account credentials to be entered. This
information can be obtained from your telephone system administrator or hosted account provider. After entering the
information and saving the settings, go to the Status tab to confirm the registration was successful.