6.5.3 More Page Extensions
Figure 23: More page extensions
Additional SIP extensions can be registered for each multicast zone that will be used. This allows the advantage of
dialing directly to a zone without needing to enter DTMF Codes (e.g., speed-dial keys can be used), but this may
require additional SIP licenses depending on the SIP provider.
To configure additional page extensions (up to 50), select ‘Enable’ beside the target extension and enter the
Extension, Authentication ID, and Authentication password.
The 8301 will auto-answer any inbound calls received on these numbers and provide a voice paging path and multicast
if configured. Only a single call can be active at a time.
To Next Page
Loading...
