8301 IP Paging Adapter & Scheduler
support@algosolutions.com
Display Name (Optional)
Enter a ‘Display Name’ that will be sent when the SIP call is made. The PBX and phone(s) will have to be configured to
display this message as the Caller ID.
Prompt Tone
Select a tone to play when the passcode is ready to be entered.
Announcements
Announcement 1
To configure an emergency alert extension, select ‘Enable’ beside the target announcement and enter the Extension,
Authentication ID, and Authentication password.
Up to 10 extensions can be registered allowing up to 10 different announcements. Audio files can also be easily
uploaded to create custom announcements. Only one ‘Call-to-Cancel’ extension is needed, despite the number of the
alert extensions.
Note
Some SIP phone systems may not support this feature if they limit the number of extensions that can be
registered on a single device.
Announcement Duration
Choose how long to allow for the announcement duration. An announcement can:
• Play Once
• Play Until Cancelled
• Default (this option follows the behavior configured in 'Default Announcement Duration')
Extension
This is the SIP extension for the announcement parameter of the 8301.
Authentication ID
The Authentication ID may also be called Username for some SIP servers and in some cases may be the same as the
extension.
Authentication Password
The SIP password is provided by the system administrator for the SIP account.
Display Name (Optional)
Enter a ‘Display Name’ that will be sent when the SIP call is made. The PBX and phone(s) will have to be configured to
display this message as the Caller ID.
To Next Page
Loading...
