Ring Extension
This is the SIP extension for the Ring parameter of the 8301.
Page Extension
This is the SIP extension for the Page parameter of the 8301. The device will auto-answer any inbound call received on
this extension and provide a voice paging path (and multicast if configured). Different page modes and options are
available in Basic Settings → SIP.
Authentication ID
Also referred to as ‘Username’ for some SIP servers, this, in some cases, may be the same as the Ring and/or Page
extension. The authentication is a name you choose to represent the page extension.
Authentication Password
This is the SIP password provided by the system administrator for the registered SIP account. Up to eight (8)
characters can be implemented. The password can be used to authenticate SIP users.
Display Name
The Display Name is what is shown on a receiving phone to which a SIP call is made. For the display name to be shown,
the PBX and phone(s) need to be configured to display this message as the Caller ID. The desired Display Name should
be entered in this field.
To Next Page
Loading...
