68 | Operating the monitor
OLED Panel
Maintenanc
e
The feature prevents the screen from image retention by
offering these functions:
• Pixel Ref
resh: To reduce temporary image retention
on the screen, you can manually activate this function
after using the monitor for a couple of hours.
Alternatively, the function is activated automatically
when you have used the monitor for 4 hours. The
p
rocess takes approximately 6 to 8 minutes to
complete.
NOTE: The power LED indicator blinks slowly in
green during the refresh process.
NOTE: If the accumulated usage time exceeds
4 hours, Pixel Refresh will be
automatically
activated when the monitor goes into Standby
mode or when you press the power button to turn
off the monitor.
• Panel Re
fresh: To prevent permanent image
retention caused by static content when you use the
monitor for 7000 hours, you can manually activate
t
his function to refresh the pixels. Alternatively, the
function is activated automatically when the
accumulated usage time exceeds the factory default
setting (7000 hours). The process takes
approxi
mately an hour to complete.
Icon Menu and
submenu
De
scription