Alinco DR-435 - DR-135 Tx Test Specification

49
5) Tx Test Specification
TEST ITEM CONDITION ADJ STANDARD TEST STANDARD NOTE
TX Output
HI POWER
136.00MHz
144.00MHz
146.00MHz
148.00MHz
173.99MHz
More than
33W
50±1W
More than
33W
More than
33W
50±3W
50±3W
50±3W
More than
33W
TA,TAG ONLY
T,TG ONLY
TA,TAG ONLY
TX Output
MID POWER
146.00MHz 10±1W 10 ±2W
TX Output
LOW POWER
146.00MHz 4±1W 3~6W
Drain Current 146.00MHz Less than 10A Less than 11A
Frequency
Deviation
146.00MHz Within ±0.3KHz Within±0.5KHz
Spurious
144.00MHz
146.00MHz
148.00MHz
173.99MHz
More than 60dB
More than 65dB
More than 65dB
More than 65dB
More than 60dB
More than 55dB
More than 60dB
More than 60dB
More than 60dB
More than 55dB
TA,TAG ONLY
M
power is also the
same as of H power
level
WIDE
146.00MHz
3.0±0.1KHz/DEV
4.5±0.1KHz/DEV
3.0±0.2KHz/DEV
4.5±0.2KHz/DEV
MIC IN 4mVemf
MIC IN 40mVemf
Modulation Level
NARROW
146.00MHz
2.2±0.1KHz/DEV 2.2±0.2KHz/DEV MIC IN 40mVemf
CTCSS
Modulation Level
WIDE
146.00MHz
800±200Hz/DEV 800±200Hz/DEV 88.5Hz
3KHz LPF ON
WIDE
146.00MHz
800±200Hz/DEV 800±200Hz/DEV Code 255
3KHz LPF ON
DCS Modulation
Level
NARROW
146.00MHz
450±100Hz/DEV 450±100Hz/DEV Code 255
3KHz LPF ON
1750Hz
Modulation Level
WIDE
146.00MHz
3.0±0.5KHz/DEV 3.0±0.5KHz/DEV
DTMF Modulation
Level
WIDE
146.00MHz
3.0±0.5KHz/DEV 3.0±0.5KHz/DE V Press
during TX
Modulation
Distortion
146.00MHz Less than 3% Less than 4%
WIDE More than 40dB More than 38dB TX S/N
NARROW More than 34dB More than 32dB
0.3 ~ 3KHz BPF ON
136.00MHz
and
L
standard
the V/M key