Block Diagram and Specifications
A-6
Table A.1 Specifications
(continued)
PROGRAMMING/COMMUNICATIONS
Adapters The maximum current draw of all adapters connected to the drive should not exceed 250 mA
Hand Held Programming Optional Human Interface Module (HIM can be removed from the Drive)
Type of Annunciation Parameters displayed in textual form, organized in Iogical groupings
Type of Display 16 character, 2 line LCD supertwist with backlight
Language Capability Multiple Languages available
Local Controls 3 versions available ( Digital Pot., Analog Pot. and Blank)
Communication Adapters Optional adapters provide Remote I/0, or RS232/RS422/RS485/DF1/DH485, or DeviceNet capability
MONITORING
Output Frequency (Hz) Displayed over the entire range of operation with direction indication
Output Voltage (V) Selectable as a displayed parameter
Output Current (A) Selectable as a displayed parameter in % or actual value
Output Power (kW) Selectable as a displayed parameter in % or actual value
DC Bus Voltage (V) Selectable as a displayed parameter
Frequency Command (Hz) Selectable as a displayed parameter
Process Parameter Any drive variable can be scaled and definable text can be added up to 8 characters
Drive Temperature _C
Selectable as a displayed parameter
Last Fault The previous 4 faults can be displayed for troubleshooting
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
Need help?
General
