Allen-Bradley 1305 Series User Manual

Programming
5-14
Setup Group (continued)
[Ada
p
tive I Lim]
Parameter # 149 Factory Default “Enabled”
[Adaptive
I
Lim]
Parameter Type Read & Write
When ENABLED (default), this parameter allows tripless
commanded accelerations into medium to high inertia
conditions and delivers maximum performance when drive
load conditions change with time. For most circumstances
this is the correct selection.
When DISABLED, this parameter allows quicker
acceleration times from stopped to commanded speed with
low system inertia.
Units Text Settings “Enabled”
“Disabled”
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Allen-Bradley 1305 Series Specifications

General

Series	1305
Dimensions	Varies by model
Weight	Varies by model
Frequency Range	50-60 Hz
Control Method	Volts per Hertz
Communication Interface	RS-485
Enclosure Type	IP20
Storage Temperature	-40-70°C
Humidity	5 to 95% non-condensing