46 Rockwell Automation Publication 1734-UM018D-EN-E - September 2017
Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 or Logix Designer Software
6. Enter 10 ms as the RPI for the 1734-OV4E module.
7. Click OK to save the configuration.
The module appears in the I/O configuration folder indented under
Ethernet.
To avoid overloading the I/O adapters, we recommend that RPI be no
less than 10 ms for rack-optimization and enhanced rack-
optimization connections, and 50 ms for direct connections.
To Next Page
Loading...
