Rockwell Automation Publication 5000-UM005B-EN-P - November 2015 9
Chapter 1
Analog I/O Module Operation in a Logix5000
Control System
Logix5000™ controllers use the 5069 Compact I/O™ analog I/O modules to
control devices in a control system. The controllers access the modules over an
EtherNet/IP network.
Analog I/O modules convert analog signals to digital values for inputs and
convert digital values to analog signals for outputs. Controllers use these signals
for control purposes.
5069 Compact I/O analog I/O modules use removable terminal blocks (RTBs)
to connect field-side wiring. You use the Logix Designer application to configure
the modules.
5069 Compact I/O analog I/O modules use the Producer-Consumer network
communication model. This communication is an intelligent data exchange
between modules and other system devices in which each module produces data
without first being polled.
Topic Page
Before You Begin 10
Types of 5069 Compact I/O Analog I/O Modules 10
Ownership 12
Construct a 5069 Compact I/O System 12
Configure a 5069 Compact I/O System 13
Input Module Operation 16
Output Module Operation 17
Listen Only Mode 20
Use 5069-ARM and 5069-FPD Modules 20
Protected Operations 23
IMPORTANT
You cannot use 5069 Compact I/O modules with all Logix5000 controllers.
For more information on which Logix5000 controllers that you can use with
5000 series analog I/O modules, see the product description at
http://www.ab.com.
To Next Page
Loading...
Need help?
General
