140 Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010
Chapter 8 Firmware Upgrades
The final dialog summarizes your choices
for upgrading the terminal firmware.
8. Click Finish to update the firmware in the
terminal.
9. Click Yes to continue with the update.
A progress bar will automatically update as
firmware files are copied to the terminal.
10. Click OK when the firmware upgrade is
complete.
The terminal will restart, executing the new
firmware.
IMPORTANT
If the firmware upgrade fails because of a power loss or some other
reason, you can restore the terminal to the factory default firmware.
Refer to Access Maintenance Operations
on page 151 for details on how
to restore the factory default settings.
To Next Page
Loading...
Need help?
General
