Allen-Bradley PanelView Plus 6 1250 - Environmental Specifications; Certifications

Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 157
Specifications Appendix A
Environmental
Specifications
Certifications
Table 69 - Environmental Specifications - 2711P-Kxxxx8, 2711P-Txxxx8,
2711P-Bxxxx8, 2711P-Kxxxx9, 2711P-Txxxx9, 2711P-Bxxxx9
Attribute 2711P-Kxxxx8, 2711P-Txxxx8,
2711P-Bxxxx8, 2711P-Kxxxx9,
2711P-Txxxx9, 2711P-Bxxxx9
Temperature, operating 0…55 °C (32…131 °F)
Temperature, nonprotein -25…70 °C (-13…158 °F)
Heat dissipation 240 BTU/hr.
Relative humidity 5…95% without condensation
Vibration 10…57 Hz, 0.012 PC-PC displacement
57…500 Hz, 2 g PC acceleration
Shock, operating 15 g at 11 ms
Shock, nonprotein 30 g at 11 ms
Enclosure ratings NEMA Type 12, 13, 4X (Indoor use only), and IEC
IP54, IP65
Airborne contaminants For PVP/POP-CE conformal-coated PCBA level
products:
ANSI/ISA S71.04 - 1985 Severity Level G3
EN60654-4:1998 Class 3
Table 70 - Certifications - 2711P-Kxxxx8, 2711P-Txxxx8, 2711P-Bxxxx8,
2711P-Kxxxx9, 2711P-Txxxx9, 2711P-Bxxxx9
Certification
(1)
(1)
When marked. See the Product Certification link on http://www.ab.com for declarations of conformity,
certificates, and other certification details.
2711P-Kxxxx8, 2711P-Txxxx8,
2711P-Bxxxx8, 2711P-Kxxxx9,
2711P-Txxxx9, 2711P-Bxxxx9
c-UL-us UL Listed Industrial Control Equipment, certified
for use in US and Canada. See File E10314.
UL Listed Industrial Control Equipment for use in:
• Class I, Div 2, Group A, B, C, D
• Class I, Zone 2, Group IIC
(3)
• Class II, Div 2 Groups F, G
• Class III Hazardous Locations
(3)
Applies only to the 1250 high-bright display module.
CE (EMC) European Union 2004/108/EC EMC Directive,
compliant with:
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
CE (LVD) European Union 2006/95/EC Low Voltage
Directive, compliant with:
• EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant
with:
AS/NZS CISPR 11; Industrial Emissions
Marine
(2)
(2)
The 700 and 1000 display modules are marked as marine certified.
Products identified with the suffix M in the
catalog number are certified to the requirements
of one or more marine societies. For additional
marine-certified components, refer to the
Product Certification link below this table.