Allen-Bradley POINT I/O User Manual

Publication 1734-UM014A-EN-P - November 2010
38 Configure the Adapter for Direct Connection in RSLogix 5000 Software
7. Click OK to save the configuration.
The relay output module appears under Ethernet.
Add the Digital Output Module
1. Right-click the name of the I/O adapter and select New Module.
The Select Module dialog opens.
Expand the Digital tree
.

Allen-Bradley POINT I/O Specifications

General

Power Supply	24V DC
Mounting	DIN Rail
Wiring Method	Removable terminal blocks
Communication Protocols	EtherNet/IP, DeviceNet, ControlNet
Operating Temperature Range	-20°C to 60°C (-4°F to 140°F)
Number of Channels	Varies by module (e.g., 8, 16, 32)
Certifications	CE, cUL
Type	Digital and Analog I/O Modules
Output Voltage	24V DC