Allen-Bradley POINT I/O User Manual

Publication 1734-UM014A-EN-P - November 2010
86 Adapter Web Dialogs
• Network Interface
– Ethernet Address (MAC)
– IP Address
– Subnet Mask
– Default Gateway
– Primary Name Server
– Secondary Name Server
– Default Domain Name
– Host Name
– Name Resolution
• Ethernet Interface Configuration
– How the Network Configuration was obtained - Static or Dynamic
•Ethernet Link
– Media Speed
– Half or Full Duplex
– Autonegotiate Status
Use the Ethernet Statistics Page
To use the Ethernet Statistics page for information about the Ethernet link
and interface and media counters, use this procedure.
1. Click Ethernet Statistics from the tab at the top of the page or panel on
the left.

Allen-Bradley POINT I/O Specifications

General

Power Supply	24V DC
Mounting	DIN Rail
Wiring Method	Removable terminal blocks
Communication Protocols	EtherNet/IP, DeviceNet, ControlNet
Operating Temperature Range	-20°C to 60°C (-4°F to 140°F)
Number of Channels	Varies by module (e.g., 8, 16, 32)
Certifications	CE, cUL
Type	Digital and Analog I/O Modules
Output Voltage	24V DC