Allen-Bradley POINT I/O - Save the Relation List

Publication 1734-UM014A-EN-P - November 2010
Configure the Adapter for Your EtherNet/IP Network 25
Save the Relation List
You can save the Relation List for later use. To save the Relation List, perform
the following steps:
1. Select Save As... from the File menu.
The Save As dialog appears.
2. Select the folder where you want to save the Relation List.
3. Enter a File name for the Relation List, for example, control system
configuration, and click Save.
You can leave the Save as type at the default setting: Bootp Config Files
(*.bpc).
You now have the option to open the file containing the Relation List at
a later session.