24 Rockwell Automation Publication 6000-IN100A-EN-P - August 2020
Chapter 1 Drive Mechanical Installation
Figure 10 - Main Cooling Fan Housing, B-Frame
Install the Cooling Fan and Noise Reduction Barrier for A-Frame
Drives
To install the cooling fan for A-Frame drives, follow these instructions.
1. Place the fan housing on the top plate of the drive. Verify that the socket
is on the same side as the aviation plug.
2. Secure the fan housing using M6 hardware (six places).
3. Connect the aviation plug located on the top of the cabinet with the
socket on the fan housing.
Figure 11 - Main Cooling Fan Housing, A-Frame
Main Cooling Fan housing
Aviation plug
Socket
Rear View
Aviation plug
Socket
Main Cooling Fan housing
Noise reduction barrier
To Next Page
Loading...
Need help?
General
