Allied Telesis GS950 PS V2 Series - Rebooting or Restoring the Switch

GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
37
Caution
The switch temporarily stops forwarding network traffic when you
reboot it or restore the default settings. Some network traffic may be
lost.  E113
Note
You can disable both the reboot and factory default reset functions
of the eco-Friendly button In the management software. Refer to the
GS950 PS V2 Gigabit Ethernet PoE+ Switch User Guide.
Rebooting or
Restoring the
Switch
To reboot the switch or restore the default settings, do one of the following:
Caution
The switch temporarily stops forwarding network traffic when you
reboot it or restore the default settings. Some network traffic may be
lost.  E113
 To reset the switch, press the eco-Friendly button for 5 to 9
seconds. The switch takes approximately 1 to 2 minutes to initialize
its management software, before resuming network operations.
 To reboot the switch and reset the switch to its factory default
settings, press the eco-Friendly button for more than 10 seconds.