Allied Telesis GS950 PS V2 Series - Figure 39: Attaching the Top BRKT-J22 Brackets to the Wall

Chapter 5: Installing the Switch on a Wall
74
Warning
Continue to hold the switch on the wall until after you complete the
next step, which installs the top brackets. Otherwise, the switch may
fall off the wall.
8. Attach the top brackets to the wall with appropriate screws. Refer to
Figure 39.
Figure 39. Attaching the Top BRKT-J22 Brackets to the Wall
9. Go to Chapter 6, “Cabling the Networking Ports” on page 75.