Allied Telesis GS950 PS V2 Series - Installing the GS950;52 PS V2 Switch on a Wall; Figure 34: BRKT-J22 Brackets Kit; Figure 35: Wall Installation of the GS950;52 PS V2 Switch with BRKT-J22 Brackets

GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
71
Installing the GS950/52PS V2 Switch on a Wall
For wall installations of the GS950/52PS V2 Switch, Allied Telesis
recommends the optional BRKT-J22 Brackets kit. The kit consists of four
identical brackets, shown in Figure 34.
Figure 34. BRKT-J22 Brackets Kit
Figure 35 illustrates the correct orientation of the GS950/52PS V2 Switch
and BRKT-J22 Brackets on a wall. The front panel has to face up and the
bottom panel has to be against the wall.
Figure 35. Wall Installation of the GS950/52PS V2 Switch with BRKT-J22
Brackets