GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
41
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
Class I Equipment. This equipment must be earthed. The power
plug must be connected to a properly wired earth ground socket
outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts. E4
Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible. E5
Air vents must not be blocked and must have free access to the
room ambient air for cooling. E6
This Warning applies only to the GS950/10PS V2 Switch.
Operating Temperatures. This product is designed for a maximum
ambient temperature of 40°C. E7
This Warning applies to all GS950 PS V2 Switches except the
GS950/10PS V2 Switch.
Operating Temperatures. This product is designed for a maximum
ambient temperature of 45°C. E52
All Countries: Install product in accordance with local and National
Electrical Codes. E8
To Next Page
Loading...
