Alpha-InnoTec Luxtronik Operating Instructions

24
We reserve the right to make technical changes | 83055400dUK – Translation of the original instruction manual (2.1) | ait-deutschland GmbH
NOTICE
If circulating pumps are selected, the ventilation program
will start immediately after the settings have been saved.
The ventilation pauses after one hour for 5 minutes and
then automatically continues afterwards.
NOTICE
As long as the ventilation program is active, the correspon-
ding program symbol will appear in the navigation screen
:
VENTILATING THE SYSTEM
The menu is not shown in full here. Further menu items
appear if you scroll down the screen.
Heat.sys.pump Heating and oor heating circulating
pump
suppl.pump additional circulating pump
DHW pump Domestic hot water circulation pump
Fan-heats.pump Fan, well or brine circulation pump
MC open 1 Mixer 1 OPEN
MC close 1 Mixer 1 CLOSE
CP Additional circulating pump, circulation
pump
Duration Running time of the ventilation
Ex-valveman.open In LWD. and SWP371-SWP691 and
SWP291H-SWP561H the expansion
valve opens completely for the set
running time.
Activate and select system part(s) to be ventilated.
Activate and select menu eld “duration”, set running time
(hour cycle).
Duration
Factory setting: 1 hour
NOTICE
Value range for running time = 1 – 24 hours.
Save settings.

Alpha-InnoTec Luxtronik Specifications

General

Brand	Alpha-InnoTec
Model	Luxtronik
Category	Controller
Language	English