Alpha-InnoTec Luxtronik Operating Instructions

36
We reserve the right to make technical changes | 83055400dUK – Translation of the original instruction manual (2.1) | ait-deutschland GmbH
Technical Data
INSTALLATION
Only in frost-free, dry and weatherproof rooms.
Ambient temperature: 0 °C – 35 °C
Electrical connection: 230 V AC, 18 VA, 0.1 A
(max. power consumption regulator
without any appliances connected)
OUTPUTS
Relay contacts: 8 A / 230 V,
Fuse: 6.3 AT (for all relay outputs)
In total consumers up to 1,450 VA can be connected to the out-
puts
INPUTS
Optocoupler: 230 V
Sensor inputs: NTC sensor 2.2 kΩ / 25 °C
CONNECTIONS
Control line: 12-pole, outputs 230 V
Sensor line: 12-pole, low voltage
Plug-in terminals: 1-pole, screw terminals
INTERFACES
USB: USB version 2.0 (USB 2.0)
Host, A plug (only for a USB stick!)
Ethernet: 1 x 10 Base-T / 100 Base-TX
(RJ-45, plug, bent)
PROTECTION CLASS
Protection class IP 20

Alpha-InnoTec Luxtronik Specifications

General

Brand	Alpha-InnoTec
Model	Luxtronik
Category	Controller
Language	English