Alpha-InnoTec Luxtronik Operating Instructions

25
We reserve the right to make technical changes | 83055400dUK – Translation of the original instruction manual (2.1) | ait-deutschland GmbH
ENERGY EFFICIENCY PUMP
Output-controlled brine/water:
Wärmeverteilsystem Radiator or underoor heating
Steuerung Hz. Automatic/manual (heating circulation
pump)
Max.Lstg.Hz. 0 - 100% of the UWP output (limitation
in case of ow noise)
Steuerung WW. Automatic/Manual (drinking water
charge pump)
Max.Lstg.WW 0 - 100% of the UWP output (limitation
in case of ow noise)
Steuerung VBO Automatic/manual (brine circulation
pump)
Output-controlled air/water:
Save settings.
FIX STARTUP PARAMETERS
NOTICE
The function “Setting startup parameters” requires custo-
mer service access.
You can save the settings you made during startup (= setting
startup parameters). This allows you to quickly and easily reset
the system to the status it had at startup.
The data is stored on the circuit board of the control element.
Follow the instructions on the screen.
You can also save the settings to an external USB stick.

Alpha-InnoTec Luxtronik Specifications

General

Brand	Alpha-InnoTec
Model	Luxtronik
Category	Controller
Language	English