Alpha AS100 Series - Naming Rules

Chapter I Purchase Inspection
8
Name
Qty.
Unit
Remarks
SCSI 50P connector
1
Pcs.
Standard configuration: for I/O
cable connection
5P quick connector
1
Pcs.
Standard configuration: for drive’s
input power supply wiring
MINI DIN 8P
communication
connector
Optional configuration: for
communication cable wiring
Note: aforesaid components may vary with different powers of the drives. The specific
configuration should be determined based on the packing list within the packing box.
1.2 Naming Rules
Naming rules of the servo drive are as follows:
AS100 A - 5R5 M2 U
Encoder Type
U: 2500CPR standard inc. Enc.
V: 2500CPR wire-saving inc. Enc.
W: 20-bit inc. Enc.
A: 17-bit absolute Enc.
Series Code
Alpha Servo 100
Series
Model Code
A: standard model (analog and
pulse command with RS485)
B: standard model with RS232
C: standard model with CAN
Rated Output Current
2R8: 2.8A 3R8: 3.8A 5R5: 5.5A
7R6: 7.6A012: 12A 3R5: 3.5A
5R4: 5.4A 8R4: 8.4A
Input Voltage
S2: Single-phase 220V
T2: Three-phase 220V
T3: Three-phase 380V
M2: Single/three-phase 220V