Need help?Do you have a question about the alphatronics DLM-600 and is the answer not in the manual?
Details DLM-600 power requirements, input voltage, and current consumption in various modes.
Describes the 4 programmable inputs and 4 outputs, including relay and open collector types.
Specifies 12-16VDC power supply, 16VDC with battery pack, and recommended adapter for the DLM-600.
How the DLM-600 functions as a stand-alone GSM dialer, transmitting alarms via GSM to selected numbers.
How the DLM-600 works as a GPRS dialer, transmitting SIA HS IP protocol to central stations.
Programming outputs to activate based on specific events like line failure, FTC, mains failure, etc.
Configuration for GPRS dialer, including primary and backup dialer settings, IP address, and test reporting.
Detailed setup for primary and backup GPRS dialers, including IP, account, port, and test intervals.
Guide to connecting AlphaTool to the DLM-600 via local serial (RS-232) connection and COM port selection.
Procedures for sending and receiving programming data between AlphaTool and the DLM-600.
How to activate or deactivate DLM-600 outputs using a DTMF telephone by calling the GSM Audio number.
Lists necessary hardware (PC, cable) and software (Renesas Flash Tool, firmware file) for updating the DLM-600.
Instructions on connecting the serial cable and setting jumpers (J43, J44, J40) to 'flash mode'.
Steps to initiate the connection between the PC and DLM-600 using the Renesas Flash Tool software.
Detailed process of pressing 'Program Flash' and monitoring the firmware writing progress to the DLM-600.
Steps to safely restart the DLM-600 after firmware flashing, including jumper removal and power reapplication.
Guide to installing the Renesas Flash Development Toolkit software, including feature selection and desktop icon creation.
Details DLM-600 power requirements, input voltage, and current consumption in various modes.
Describes the 4 programmable inputs and 4 outputs, including relay and open collector types.
Specifies 12-16VDC power supply, 16VDC with battery pack, and recommended adapter for the DLM-600.
How the DLM-600 functions as a stand-alone GSM dialer, transmitting alarms via GSM to selected numbers.
How the DLM-600 works as a GPRS dialer, transmitting SIA HS IP protocol to central stations.
Programming outputs to activate based on specific events like line failure, FTC, mains failure, etc.
Configuration for GPRS dialer, including primary and backup dialer settings, IP address, and test reporting.
Detailed setup for primary and backup GPRS dialers, including IP, account, port, and test intervals.
Guide to connecting AlphaTool to the DLM-600 via local serial (RS-232) connection and COM port selection.
Procedures for sending and receiving programming data between AlphaTool and the DLM-600.
How to activate or deactivate DLM-600 outputs using a DTMF telephone by calling the GSM Audio number.
Lists necessary hardware (PC, cable) and software (Renesas Flash Tool, firmware file) for updating the DLM-600.
Instructions on connecting the serial cable and setting jumpers (J43, J44, J40) to 'flash mode'.
Steps to initiate the connection between the PC and DLM-600 using the Renesas Flash Tool software.
Detailed process of pressing 'Program Flash' and monitoring the firmware writing progress to the DLM-600.
Steps to safely restart the DLM-600 after firmware flashing, including jumper removal and power reapplication.
Guide to installing the Renesas Flash Development Toolkit software, including feature selection and desktop icon creation.
General| Type | Media Converter |
|---|---|
| Model | DLM-600 |
| Data Rate | 10/100Mbps |
| Wavelength | 1310nm |
| Transmission Distance | 2km |
| Fiber Type | Multimode |
To Next Page