Altronic DE-2500 - Firmware Revisions and First Fault Time; Viewing Firmware Revisions; Viewing First Fault Timestamp

To Next Page

To Previous Page

-35-

14.14 To view the firmware revisions of the DISPLAY and TERMINAL modules, select “VIEW

FIRMWARE REV.” from the main menu then press ENTER.

EDIT CONTROL VALUES

EDIT SAFETY SHUTDOWN

HOURMETER FUNCTIONS

6VIEW FIRMWARE REV.

NOTE: Special firmware versions will display file reference number on bottom line.

DE-2500

DISPLAY: 05/12/01

TERMINAL: 04/02/01

SPECIAL: 000001

15.0 VIEWING THE TIME AND DATE OF THE FIRST FAULT

15.1 The DE-2500 controller system “stamps” the time and date occurrence of the first fault. To

view the time and date of the first fault, press the F2 key after a fault occurs but before reset

is initiated. The time and date of the first fault will be displayed. If no key is pressed for 10

seconds, the display will revert back to the first fault screen. Press the ESC key to return to

the current home screen.

view time

& date of

first fault

TIME AND DATE OF

THE FIRST FAULT.

TIME: 3:10 PM

DATE: 03-25-2000